- About Us
- Industry Sectors
- Contact Us
Wood Chip Intake System
To design and install a intake system with bunker, hoppers, conveyors and electrics
The intake system was designed to accommodate a G100W50 wood chip from a walking floor arctic trailer, and transfer it to a storage bunker at a rate of 135cu.m/hr.
The intake hopper was placed behind one of the two roller shutter doors in the building. The delivery vehicle reversed up to the reception hopper and discharged the wood chip. The load was then removed from the hopper by a large diameter twin screw discharger, and fed into a scraper chain conveyor which elevated the wood chip up to a high level where it is dropped into the bunker distribution conveyors. These distribution conveyors are a scrapper chain type, both running the length of the bunker with multiple outlets.
A bespoke bunker was designed by GAME Engineering, fitted with blow-line fill pipes.
The contract was carried out as a sub-contract project complete with electrics.» Return to previous page
With mother nature pushing on regardless of coronavirus and this year’s harvest just around the corner, we’ve had to get these conveyors installed whilst practis
We have remained open since the start of “lockdown” and our engineers have been working hard (and safely) in difficult circumstances, to ensure that we meet with
GAME Engineering Ltd
Witham St Hughs Business Park
Witham St Hughs, Lincoln.
LN6 9TW. ENGLAND
Tel: +44 (0)1522 868021
Fax: +44 (0)1522 868027